HMF RCL 5300 Error Codes

001Stop button pushed.
002Communication failure internally in the RCL 5300.
003No transmission from the RCL to the ECT 5320.
004RAM error.
005Internal Real Time Clock, communication failure.
006Real Time Clock, battery.
010Proximity switch at top seat not activated
011Internal data communication failure RCLB system 1.
012Internal data communication failure RCLB system 2.
013Internal data communication failure RCLB
 system 3.
014Internal data communication failure RCLB system 4.
015Internal data communication failure RCLB system 5.
016Internal data communication failure RCLB system 6.
080Failure on output in the RCL 5300 for sensors.
081Failure on output in the RCL 5300 for sensors.
091CAN bus error when starting up.
092CAN bus interrupted
093Can-Bus boot up condition.
099Several system errors.
100Internal PDO configuration error (System 1).
101CIO5399,
communication failure.
  
102CIO 5399,
communication failure.
103CIO 5070/5071,
communication failure.
104FJC 5330,
communication failure.
105FJC 5330,
communication failure.
106WIC 5333,
communication failure.
107WIC 5333,
communication failure.
108RC-electronic box, communication failure
118AIC 5062
controller, communication failure
119AIC 5062
controller, internal communication failure
120AIC 5062/2
controller,
 communication failure
121AIC 5062/2
controller, internal communication failure
150RCL 5301, EVS,
internal communication failure.
151EVS error
180CAN-RC, no radio communication.
181CAN-RC, start up error.
182CAN-RC, error
183CAN-RC, stop button, error.
184CAN-RC, Wire
security 1, error.
185CAN-RC, Wire
security 2, error.
186CAN-RC, stop
 button – RUN, error.
187CAN-RC, unknown type
192Modul Time Out configuration error
201PVED, output error, slewing
202PVED, output error, boom
203PVED, output error, jib
204PVED, output error, extension
205PVED, output error, Fly-Jib
206PVED, output error, Fly-Jib extension
  
207PVED, output error, winch
208PVED, output error, rotator
209PVED, output error, grab
221PVED, internal error
223PVED,
configuration error
224PVED, incorrect voltage
225PVED, wrong spool position
226PVED, spool is stuck in neutral position
460High pressure level, MCP1
461Low pressure level, MCP1.
462High pressure level, FJCP1
463Low pressure level, FJCP1
466Pressure transducer MP1, fixed
467Pressure transducer FJP1, fixed
479PVSK loader mode/dump, malfunction.
  
480PVSK stabilizer mode/dump, malfunction.
485Spool sensor error, slewing.
486Spool sensor error, boom.
487Spool sensor error, jib.
488Spool sensor error, extension.
489Spool sensor error, Fly-Jib – jib
  
490Spool sensor error, Fly-Jib – extension
491Spool sensor error, winch.
501Low signal, MP1
502Low signal, MP2
503Low signal, MCP1
507Low signal, FJP1
508Low signal, FJP2
509Low signal, FJCP1
511Low signal, WP1
512Low signal, WP2
  
540Low signal, temperature sensor.
551High signal, MP1
552High signal, MP2
553High signal, MCP1
557High signal, FJP1
558High signal, FJP2
559High signal, FJCP1
561High signal, WP1
562High signal, WP2
  
590High signal, temperature sensor.
601AD1 RCL 5300 B,
analogue input error.
602AD2 RCL 5300 B,
analogue input error.
603AD3 RCL 5300 A,
analogue input error.
604AD4 RCL 5300 A,
analogue input error.
605AD5 RCL 5300 A,
analogue input error.
606AD6 RCL 5300 A,
analogue input error.
607AD7 RCL 5300 B,
analogue input error.
608AD1 FJC 5330 A
analogue input error.
609AD2 FJC 5330 A
analogue input error.
610AD3 FJC 5330 B
analogue input error.
611AD4 FJC 5330 B
analogue input error.
612AD1 WIC 5333 A
error on the analogue input.
613AD2 WIC 5333 A
error on the analogue input.
614AD3 WIC 5333 B
error on the
 analogue input.
615AD4 WIC 5333 B
error on the analogue input.
616AD1 CIO 5376 A
error on the analogue input.
617AD2 CIO 5376/2 A
error on the analogue input.
618AD3 CIO 5376 B
error on the analogue input.
619AD4 CIO 5376/2 B
error on the analogue input.
701Dump valve, current below level.
703Stabilizer change- over valve, current below level.
704HDL-valve, current below level.
705Regeneration – boom, current below level.
706Regeneration – jib, current below level.
707Regeneration – extension, current below level.
708Regeneration – Fly-Jib – extension,
current below level.
709Engine full RPM, current below level.
  
710Engine RPM -, current below level.
711Engine RPM +, current below level.
712Spotlight, current below level.
713PVEO-DI electric activation, PVSK stabilizer mode, current below level.
714PVEO-DI electric activation, PVSK loader mode, current below level.
715Horn, current below level.
716Warning light, current below level.
717Engine start, current below level.
718Engine stop, current below level.
733Stowing of winch,
current below level.
  
734Change-over valve, Fly-Jib/rotator, current below level.
735Change-over valve, Fly-Jib/grab, current below level.
736Stabilizers – low speed, current below level.
737Stabilizers – high speed, current below level.
738Stabilizers – direction A, current below level.
739Stabilizers – direction B, current below level.
740Stabilizer valve 1, current below level.
741Stabilizer valve 2, current below level.
742Stabilizer valve 3, current below level.
743Stabilizer valve 4, current below level.
  
744Stabilizer valve 5, current below level.
745Stabilizer valve 6, current below level.
746Stabilizer valve 7, current below level.
747Stabilizer valve 8, current below level.
748Stabilizer valve 9, current below level.
749Stabilizer valve 10, current below level.
750Stabilizer valve 11, current below level.
751Stabilizer valve 12, current below level.
752Lever configuration 1,  current below level.
753Lever configuration 2,  current below level.
  
754Lever configuration 3,  current below level.
755Lever configuration 4,  current below level.
756Lever configuration 5,  current below level.
757Lever configuration 6,  current below level.
758Lever configuration 7, current below level.
759Lever configuration 8,  current below level.
776Radio control button 1,  current below level.
777Radio control button 2,  current below level.
778Radio control button 3,  current below level.
779Radio control button 4,  current below level.
  
780Radio control button 5,  current below level.
781Radio control button 6,  current below level.
782Radio control button 7,  current below level.
783Radio control button 8,  current below level.
784Radio control button 9,  current below level.
785Radio control button 10,  current below level.
786Radio control button 11,  current below level.
787Radio control button 12,  current below level.
788Radio control button 13,  current below level.
789Radio control button 14,  current below level.
  
790Radio control button 15,  current below level.
791Radio control button 16,  current below level.
792Radio control button 17,  current below level.
793Radio control button 18,  current below level.
794Radio control button 19,  current below level.
795Radio control button 20,  current below level.
796Radio control button 21,  current below level.
797Radio control button 22,  current below level.
799Unknown signal output, current below level.
801Dump valve, current above level.
803Stabilizer change- over valve, current above level.
804HDL-valve, current above level.
805Regeneration – boom, current above level.
806Regeneration –  jib, current above level.
807Regeneration – extension, current above level.
808Regeneration – Fly- Jib – extension, above level.
809Engine full RPM, current above level.
  
810Engine RPM -, current above level.
811Engine RPM +, current above level.
812Spotlight, current above level.
813PVEO-DI electric activation, PVSK stabilizer mode, current above level.
814PVEO-DI electric activation, PVSK loader mode, current above level.
815Horn, current above level.
816Warning light, current above level.
817Engine start, current above level.
818Engine stop, current above level.
833Stowing of winch, current above level.
  
836Stabilizers – low speed, current above level.
837Stabilizers – high speed, current above level.
838Stabilizers – direction A, current above level.
839Stabilizers – direction B, current above level.
840Stabilizer valve 1, current above level.
841Stabilizer valve 2, current above level.
842Stabilizer valve 3, current above level.
843Stabilizer valve 4, current above level.
844Stabilizer valve 5, current above level.
845Stabilizer valve 6, current above level.
  
846Stabilizer valve 7, current above level.
847Stabilizer valve 8, current above level.
848Stabilizer valve 9, current above level.
849Stabilizer valve 10, current above level.
850Stabilizer valve 11, current above level.
851Stabilizer valve 12, current above level.
852Lever configuration 1,  current above level.
853Lever configuration 2,  current above level.
854Lever configuration 3,  current above level.
855Lever configuration 4,  current above level.
  
856Lever configuration 5,  current above level.
857Lever configuration 6,  current above level.
858Lever configuration 7,  current above level.
859Lever configuration 8,  current above level.
901RCL 5300, dig. 1,
output error.
902RCL 5300, dig. 2,
output error.
903RCL 5300, dig. 3,
output error.
904RCL 5300, dig. 4,
output error.
911FJC 5330, dig. 1,
output error.
912FJC 5330, dig. 2,
output error.
913WIC 5333, dig. 1,
output error.
914WIC 5333, dig. 2,
output error.
921CIO 5070/5071,
dig. 1, output error.
922CIO 5070/5071,
dig. 2, output error.
923CIO 5070/5071,
dig. 3, output error.
924CIO 5070/5071,
dig. 4, output error.
925CIO 5070/5071,
dig. 5, output error.
926CIO 5070/5071,
dig. 6, output error.
927CIO 5070/5071,
dig. 7, output error.
928CIO 5070/5071,
dig. 8, output error.
929CIO 5070/5071,
dig. 9, output error.
930CIO 5070/5071,
dig. 10, output error.
931CIO 5070/5071,
dig. 11, output error.
932CIO 5070/5071,
dig. 12, output error.
933CIO 5071, dig. 13,
output error.
934CIO 5071, dig. 14,
output error.
935CIO 5071, dig. 15,
output error.
936CIO 5071, dig. 16,
output error.
937CIO 5374
(controller 1), dig.
1, output error.
938CIO 5374
(controller 1), dig.
2, output error.
939CIO 5374
(controller 1), dig.
3, output error.
940CIO 5374
(controller 1), dig.
4, output error.
941CIO 5374
(controller 2), dig.
1, output error.
942CIO 5374
(controller 2), dig.
2, output error.
943CIO 5374
(controller 2), dig.
3, output error.
944CIO 5374
(controller 2), dig.
4, output error.
951Radio remote control, error on digital output 1.
952Radio remote control, error on digital output 2.
953Radio remote control, error on digital output 3.
954Radio remote
 control, error on digital output 4.
955Radio remote control, error on digital output 5.
956Radio remote control, error on digital output 6.
957Radio remote control, error on digital output 7.
958Radio remote control, error on digital output 8.
959Radio remote control, error on digital output 9.
960Radio remote control, error on digital output 10.
961Radio remote control, error on digital output 11.
962Radio remote control, error on digital output 12.
963Radio remote control, error on digital output 13.
964Radio remote control, error on digital output 14.
965Radio remote control, error on digital output 15.
966Radio remote control, error on digital output 16.
  

 

 

If you want more information about the error codes, please contact us with the form below