80% and F5 – CAN-bus connected parts

80% and F4 -Initialization of  CAN-bus connected parts

80%, 85% and F4 – Pressure sensor Fly-jib output side

90% and F3 – Oil cooler error

80%, F4 and F5 – Boom pressure sensor comparison

85% and F5 – Spool sensor winch

85% and F4 – Spool sensor fly-jib extention

85%, F4 and F5 – Spool sensor fly-jib

85% and F3 – Spool sensor extention

85%, F3 and F5 – Spool sensor outer boom

85% , F3 and F4 – Spool sensor boom

90%, F3 and F5 – HDL valve error

85% and F5 – Spool sensor winch

85%, F3, F4 and F5 – Spool sensor slewing

85%, 80% and F5 – pressure sensor winch

85%, 80%, F4 and F5 – Pressure sensor fly-jib input side

85%, 80% and F3 – Pressure sensor boom

90% and F5 – Output OUT 1

90% and F4 – Output OUT 2

90%, F4 and F5 – Output OUT 3

90%, F3 and F4 – Output OUT 4

90%, 80% and F5 – Oil temp. high

90%, 85% and F4 – Incorrect set up of RCL

90%, 85%, F4 and F5 – No internal set up

90%, 85%, 80% and F4 – Internal error in AIC

90%, 85% and 80% – Error in signal from AIC

80% – CAN-bus communication (IRC)

85% – No RF-signal (IRC)

85% and 80% – Stop button pushed in (IRC)

90% – Startup error (IRC)

90% and 80% – Missing dump signal (IRC)

90% and 85% – Checksum error, (IRC)

100% – Emergency operation (IRC)

100% and 80% – Unknown error (IRC)