FASSI Error Codes and Alarm Codes

01Corrupt data in EEPROM memory
(parameters).
02TP1 transducer value out of range.
04TP2 transducer value out of range.
06TP3 transducer value out of range.
08Proximity lP2 off
09Proximity lP1 and lP3 (laterals) off
11AN2  crane  angular  sensor  value
out of range
12LCV load cell value out of range
14Inner boom micro switch
15Outer boom micro switch
16Jib boom micro switch
17Crane extension booms microsw.
18Jib extension booms micro switch
19Winch micro switch
20Rotation micro switch
25AN3  Jib  angular   sensor  out  of
range
26Feeding  tension  value  below  the
minimum required.
28FSC central proximity sensor off
29FSC lateral proximity sensors off
30Inconsistency of the rotation lever
movement
31Inconsistency  of  the  inner  boom
lever movement
32Inconsistency  of  the  outer  boom
lever movement
33Inconsistency     of     the     crane
extension booms lever movement
34Inconsistency of the jib boom lever
movement
35Inconsistency  of the jib extension
booms lever movement
36Inconsistency  of  the  winch  lever
movement
37Rotation inconsistency
41FX504 Can
42

PLE in manual

43FX504B Can
44FX504C Can
50Output  0 (EV1) controlled  off but
reread on.
51Output  0 (EV1)  controlled  on but
reread off.
52Output  1 (EV2)  controlled  off but
reread on.
53Output  1 (EV2)  controlled  on but
reread off.
54Output  2 (EV3)  controlled  off  but
reread on.
55Output  2 (EV3)  controlled  on but
reread off.
56Output  3 (EV4)  controlled  off but
reread on.
57Output  3 (EV4)  controlled  on but reread off.
58Output  4 (EVS)  controlled  off but
reread on.
59Output  4 (EVS)  controlled  on but
reread off.
60Alarm WDO relay opened
61Alarm WDO relay closed
62Alarm    feeding    tension    output
under WDO
63Alarm of lack of the main feeding
tension of the WOO circuit
64Alarm Danfoss distributor  feeding
relay

 

70Timeout     of     Can     messages
reception from digital tilting sensor
71Timeout     of     Can     messages
reception from can Encoder 1
72Timeout     of     Can     messages
reception from Can Encoder 2
73Timeout     of     Can     messages
reception from Can Encoder 3
74Timeout     of     Can     messages
reception from Can Encoder 4
75More then one digital tilting sensor
on Can bus line
76
More then one cable-reel encoder
1 on Can bus line
 More then one cable-reel encoder
2 on Can bus line
78More then one cable-reel encoder
4 on Can bus line
79More then one cable-reel encoder
3 on Can bus line
84RADIO EM
90TP0 transducer value out of range
91TT temperature  sensor  value out
of range
99Warning!    Crane    not    levelled.
Stability could be compromised.

 

100PVEDO Danfoss
101PVED1 Danfoss
102PVED2 Danfoss
103PVED3 Danfoss
104PVED4 Danfoss
105PVEDS Danfoss
106PVED6 Danfoss
107PVED7 Danfoss
108PVED8 Danfoss
109PVED9 Danfoss
110PVED10 Danfoss
120PVEDO Danfoss MULTI
121PVED1 Danfoss MULTI
122PVED2 Danfoss MULTI
123PVED3 Danfoss MULTI
124PVED4 Danfoss MULTI
125PVEDS Danfoss MULTI
126PVED6 Danfoss MULTI
127PVED7 Danfoss MULTI
128PVED8 Danfoss MULTI
129PVED9 Danfoss MULTI
130PVED10 Danfoss MULTI
141PVED1 Danfoss RX
142PVED2 Danfoss RX
143PVED3 Danfoss RX
144PVED4 Danfoss RX
145PVEDS Danfoss RX
146PVED6 Danfoss RX
147PVED7 Danfoss RX
148PVED8 Danfoss RX
149PVED9 Danfoss RX
150PVED10 Danfoss RX
200Internal alarm of the FX504A slave
unit
201Output 0 of FX504A, controlled off
but reread on.
202Output 0 of FX504A, controlled on
but reread off.
203Output 1 of FX504A, controlled off
but reread on.
204Output 1 of FX504A, controlled on
but reread off.
205Output 2 of FX504A, controlled off
but reread on.
206Output 2 of FX504A, controlled on
but reread off.
207Output 3 of FX504A, controlled off
but reread on.
208Output 3 of FX504A, controlled on
but reread off.
209Output 4 of FX504A, controlled off
but reread on.
210Output 4 of FX504A, controlled on
but reread off.
211Output 5 of FX504A, controlled off
but reread on.
212Output 5 of FX504A, controlled on
but reread off.
213Output 6 of FX504A, controlled off
but reread on.
214Output 6 of FX504A, controlled on
but reread off.
215Output 7 of FX504A, controlled off
but reread on.
216Output 7 of FX5O4A, controlled on
but reread off.
217Alarm relay of WDO on FX504A
218Alarm relay of WDO on FX504A
219Alarm    feeding    tension    output
under WDO
220Alarm   of   lost   of   main   feeding tension  in  the  WDO  circuit  on
FX504A
221Multi ID10 (FX504A) on Can
230Internal alarm of the FX504B slave
unit
231Output 0 of FX504B, controlled off
but reread on.
232Output 0 of FX504B, controlled on
but reread off.
233Output 1 of FX504B, controlled off
but reread on.
234Output 1 of FX504B, controlled on
but reread off.
235Output 2 of FX504B, controlled off
but reread on.
236Output 2 of FX504B, controlled on
but reread off.
237Output 3 of FX504B, controlled off
but reread on.
238Output 3 of FX504B, controlled on
but reread off.
239Output 4 of FX504B, controlled off
but reread on.
240Output 4 of FX504B, controlled on
but reread off.
241Output 5 of FX504B, controlled off
but reread on.
242Output 5 of FX504B, controlled on
but reread off.
243Output 6 of FX504B, controlled off
but reread on.
244Output 6 of FX504B, controlled on
but reread off.
245Output 7 of FX504B, controlled off
but reread on.
246Output 7 of FX504B, controlled on
but reread off.
247Alarm   open   relay   of   WDO   on
FX504B
248Alarm   close  relay  of  WDO  on
FX504B
249Alarm    feeding    tension    output
under WDO of FX504B
250Alarm   of   lost   of   main   feeding
tension   in   the   WDO   circuit   of FX504B
251Multi ID11 (FX504B) on Can
260Internal alarm of the FX504C slave
unit
261Output 0 of FX504C, controlled off
but reread on.
262Output 0 of FX504C, controlled on
but reread off.
263Output 1 of FX504C, controlled off
but reread on.
264Output 1 of FX504C, controlled on
but reread off.
265Output 2 of FX504C, controlled off
but reread on.
266Output 2 of FX504C, controlled on
but reread off.
267Output 3 of FX504C, controlled off
but reread on.
268Output 3 of FX504C, controlled on
but reread off.
269Output 4 of FX504C, controlled off
but reread on.
270Output 4 of FX504C, controlled on
but reread off.
271Output 5 of FX504C, controlled off
but reread on.
272Output 5 of FX504C, controlled on
but reread off.
273Output 6 of FX504C, controlled off
but reread on.
274Output 6 of FX504C, controlled on
but reread off.
275Output 7 of FX504C, controlled off
but reread on.

 

276Output 7 of FX504C, controlled on
but reread off.
277Alarm   open   relay   of   WDO   on FX504C
278Alarm   close  relay  of  WDO  on
FX504C
279Alarm    feeding    tension    output
under WDO of FX504C
280Alarm   of   lost   of   main   feeding
tension   in   the   WDO   circuit   of FX504C
281Multi ID12 (FX504C) su Can

 

 

If you want more information about the error codes, please contact us with the form below